Skip to main content

How Do I Separate and Install Drawer Slides?

  • Updated

Watch our step-by-step instruction video to help you separate and install the drawer slides.

Installing drawer slides correctly is essential for smooth operation and stability in your furniture. Here’s a step-by-step guide to help you separate and install drawer slides effectively:

Separating Drawer Slides

  1. Identify the Drawer Slides: Drawer slides typically come in pairs—one for the left side (usually marked with "L" or "CL") and one for the right side (marked with "R" or "CR"). Ensure you have both slides ready for installation.

  2. Locate Release Mechanism: Most drawer slides have a release mechanism that allows you to separate the slide components. Look for tabs or levers on the slides near the drawer release clips.

  3. Activate Release Mechanism: To separate the slides, lift up on the right side and push down on the left side to activate the release mechanism. This may involve pressing down on a tab or lever while gently pulling the drawer slide components apart.

  4. Separate the Slides: Once the release mechanism is activated, carefully pull the drawer slides apart. Ensure you keep the slides aligned to prevent damage or misalignment.

Installing Drawer Slides

  1. Prepare the Drawer and Cabinet:

    • Position the drawer on a flat surface, ensuring it is oriented correctly with the front facing upward.
    • Position the cabinet or furniture unit where the drawer will be installed.

  2. Align and Position Slides:

    • Identify the left and right slides according to the markings (CL/CR for cabinet and DL/DR for drawer).
    • Position the left slide (CL or DL) on the left side of the drawer and the right slide (CR or DR) on the right side.

  3. Mount Slides on Drawer:

    • Position the drawer slide flush with the front edge of the drawer side.
    • Use screws provided to secure the slides to the drawer. Ensure the slides are level and straight.

  4. Mount Slides in Cabinet:

    • Position the cabinet slide flush with the front edge of the cabinet side.
    • Use screws provided to secure the slides to the cabinet. Ensure the slides are level and aligned with the drawer slides.

  5. Test Drawer Movement:

    • Slide the drawer into the cabinet to test movement and alignment.
    • Ensure the drawer slides smoothly and closes completely without obstruction.

  6. Adjust if Necessary:

    • If the drawer does not slide smoothly or aligns incorrectly, adjust the position of the slides or screws accordingly.

  7. Securely Fasten:

    • Once satisfied with the alignment and movement, securely tighten all screws to ensure the slides are firmly in place.

Tips for Installation:

  • Follow Manufacturer Instructions: Always refer to the specific assembly instructions provided by the manufacturer for your furniture model.
  • Check for Smooth Operation: Ensure the drawer slides smoothly and without resistance before finalizing installation.
  • Double-Check Alignment: Proper alignment of the drawer slides is crucial for stability and functionality.

When to Seek Assistance:

If you encounter difficulties during the separation or installation process of drawer slides, or if you have any questions, please contact our Consumer Service Team for assistance:

We are here to help ensure your furniture assembly experience is successful and satisfying.

Note: This information is current as of 6/1/2024. Our policies and procedures are subject to change, so please check our website or contact customer service for the most up-to-date information.

Related to

Related articles